ZOKO-098 Fully Automatic Single-End Housing Insertion & Tail Crimping Machine
  • Model:098
  • Brand:ZOKO
  • Warranty:1 year

INQUIRY NOW

×Enter your message

Product
ZOKO-098 Fully Automatic Single-End Housing Insertion & Tail Crimping Machine

Core Functions

  • 1. Terminal crimping & housing insertion on one endCrimp one type of terminal on one side and auto insert into housing, single wire single processing.
  • 2. Single terminal crimping at tail endCrimp one type of single terminal on both sides, both ends finished in one cycle.
  • 3. 8 wire colors optional8 colors available, length: 150–900 mm, wire gauge: AWG24#–18#
  • 4. Vision + force dual inspectionVision inspection for terminals and stripping; force system for crimping quality check.

Product Highlights

  1. Single-wire Integrated Processing — Crimp terminal & insert housing on one side, single terminal crimping on the other side, all completed by one machine
  2. 8 Wire Colors — 8 colors optional, processing length: 150–900 mm, wire gauge: AWG24#–18#
  3. High-precision Stripping — Forward & reverse ball screw + HIWIN linear guide + servo motor; stripping depth tolerance: 0.02 mm, length tolerance: 0.05 mm
  4. 750W Servo Crimping Machine — Dimension: 295×210×391 mm. Single motor for crimp forming and crimp height adjustment
  5. Assembly Position Detection — Digital pressure regulating valve (0.01–0.4 MPa) + SMC low-friction air cylinder, equipped with pull-back distance detector
  6. High Speed & High Yield — Single-hole housing insertion: 2.5–3.2 sec/pc, good product rate: 99.5%
Parameter Specification
Product Name Fully Automatic Single-End Housing Insertion & Tail-End Terminal Crimping Machine
Model ZOKO-098
Function Crimp one type of terminal and insert housing on one side; crimp one type of single terminal on the other side
Applicable Wire Gauge AWG#24 ~ #18
Wire Colors 8 colors optional
Processing Length 150 ~ 900 mm
Stripping Length Side 1: 1.0 ~ 6 mm; Side 2: 1.0 ~ 8.5 mm
Crimping Force 2.0 T
Applicable Terminals JAM, JST, OPH horizontal-feed terminals (OTP die mounting accessories included)
Crimping Machine 750W servo motor, 295×210×391 mm
Wire Feeding Method Servo motor wire pulling (8–10 wire feed sets, configurable per customer requirements)
Stripping Method Forward & reverse ball screw
Capacity Single wire 2.5 ~ 3.2 s/pc (single-hole housing insertion)
Good Product Rate 99.5%
Assembly Method Sequential assembly
Handling Method Side 1 & 2 carriages operate synchronously via spline shaft, high positioning accuracy
Quality Inspection Optional vision inspection for terminals and stripping; terminal crimping force system inspection
Housing Feeding Vibratory bowl feeder (housings with up to 10 cavities)
Air Pressure Requirement Clean air 0.5 ~ 0.7 MPa
Power Supply 220 V
Terminal Crimping Units 2 single-terminal crimping machines
Overall Dimensions 3000 L × 1900 H (mm)